TS-918
Expansion Unit
TS-918
The TS-918 is an interface necessary for incorporating the Wired conference unit(s) in the conference system. It is connected to the TS-910 Central unit with a coaxial cable and to the TS-919B1 or TS-919B4 Bridge unit with a Category 5 cable. With the use of an optional rack mounting bracket, it can be mounted in an EIA Standard equipment rack (1 unit size).
- Interface for incorporating the wired conference unit(s) into the conference system
- Can be mounted in an EIA Standard equipment rack (1 unit size)
- Auto Mic-Off function to prevent inadvertent microphone shutoff failure
- Speaker restriction function
- Speeches can be addressed to audience via externally interlinked sound reinforcement system
電源
100 - 240 V AC, 50/60 Hz (use of the supplied AC adapter)
消耗功率
74.4 W
消耗電流
Max. 3.1 A DC (when 24 V DC is supplied from the accessory AC adapter)
Gain
Upstream: +16.5 dB
Downstream: +12.5 dB
Downstream: +12.5 dB
Connection Terminal
Central unit connection terminal: BNC jack
Bridge unit connection terminal: RJ45 connector
Bridge unit connection terminal: RJ45 connector
LED指示燈
Connection status indicators (3 LEDs each on the front and rear panels),
Power indicator
Power indicator
可連接席數
Up to 24 units (when using 21 units of TS-919B1 or 6 units of TS-919B4, both optional Expansion units)
工作溫度
0 ℃ to +40 ℃ (32 ℉ to 104 ℉)
外觀
Panel: Aluminum, black, 30% gloss, melamine-baked paint
case: Pre-coated steel plate, black
case: Pre-coated steel plate, black
尺寸
210 (W) x 44 (H) x 296.5 (D) mm (8.27 x 1.73" x 11.67")
重量
1.6 kg (3.53 lb)
附屬品
AC adapter (Cord length: 1.8 m (5.91 ft) DC cord, and 2 m (6.56 ft)
detachable AC cord)…1, BNC plug-to-BNC plug cord (50 cm (1.64 ft) …1
detachable AC cord)…1, BNC plug-to-BNC plug cord (50 cm (1.64 ft) …1
選配品
Rack mounting bracket: MB-15B-BK (for rack mounting one TS-918 unit)
MB-15B-J (for rack mounting two TS-918 units)
MB-15B-J (for rack mounting two TS-918 units)
請下載資料以獲取完整規格。
The Expansion Unit shall be an interface for incorporating the Wired Conference unit(s) in the conference system. It shall be connected to the Central unit with a coaxial cable and to the Bridge Unit with a Cat-5 cable. Two types of Bridge units shall be available: single-Conference unit connection type and 4-Conference unit connection type, either of which is freely selectable depending on installation conditions. A total of up to 24 Chairperson/Delegate Units shall be connected per the Expansion unit. The Expansion Unit shall supply 24V DC power to the connected Chairperson/Delegate Units through Bridge Unit(s). Up to 8 Expansion units shall be installed in one system. The Expansion Unit shall be mounted on an EIA equipment rack by using the optional rack-mounting bracket.
The Expansion Unit shall be the TOA model TS-918.
The Bridge Unit shall be the TOA model TS-919B1/919B4.
請登入以存取更多技術資料，例如軟體、韌體或EASE檔案。
