LS-3010-AS
線路監控器
LS-3010-AS
LS-3010-AS 是一款高可靠性和高效率的 10 頻道線路監控器，專用於測量或監控每條喇叭線路的阻抗而設計，每條喇叭線路的狀態（正常、開路或短路）可以通過 LED 指示燈輕鬆識別。
- 10 個頻道來自放大器輸入， 10 個頻道輸出至喇叭線路
- 10 個頻道衰減器旁路控制 及 1 個故障控制
- 各分區喇叭線路故障檢測：正常（綠色）、開啟（橙色）、短路（紅色）LED 指示燈
- 1W 至 500W（測量範圍：20 Ω 至 10k Ω)
- 可設定 1 分鐘、1 小時、12 小時 及 24 小時定時監控喇叭線路
- 具備蜂鳴器燈光測試功能
- 短路喇叭線路隔離功能
- 具備阻抗測量功能，可檢測喇叭線路分支
4 個 LED 定時器（綠色）
1 個 LED 蜂鳴器（綠色）
1 個 LED 重置（綠色）
1 個 LED 電源（綠色）
燈光測試、校準、測量
蜂鳴器、重置、10 個頻道選擇
外殼：鋼板，黑色噴漆
2P 連接器 × 1
請下載資料以獲取完整規格。
The speaker line supervisory panel is a highly efficient 10 channels speaker line monitoring system. It is able to detect individual speaker line impedance condition that displays status by indicating short - red, open – yellow, normal -green on the 10 LEDs. The LED indicates measurement and shown no speaker is connected. The impedance measured from 20Ω to 10KΩ. Each channel can handle speaker load of 1W to 500W. In the case of speaker line is short circuit, the output will isolate and protect the amplifier from damage. There are 10 individual dry contacts control out that allow the attenuator to be bypass during speaker measurement. A fault out allows to connect to other monitoring device.
The front panel shall include time schedule checks of 1min, 1 hour, 12 hours, 24 hours and OFF. There are buttons for lamp test, calibrate, measure, Buzzer bypass and reset. Front panel with a power indicator, 10 individuals bypass channel OFF switch that allow speaker line check to be bypass.
The speaker line supervisory panel shall be capable of operation from a 24VDC power at 1 Ampere.
請登入以存取更多技術資料，例如軟體、韌體或EASE檔案。
