IP-A1SC15

IP 號角指向喇叭

IP-A1SC15

IP-A1SC15是一款IP 號角指向喇叭，能夠透過網絡提供清晰的廣播，最大音量可達124分貝，並由PoE+供電。其堅固的外殼達到IP66防護等級，適合戶外使用。IP-A1SC15支援常見的網絡協定，易於與視頻管理系統和其他SIP相容的VoIP系統及設備整合。它具備組播功能，提供20個組播埠滿足區域廣播需求。設備內部存有預錄訊息和提示音，可透過2個控制輸入或遠程API (HTTP)觸發播放。

124dB（PoE+ 供電），IP66 防護等級，適合戶外安裝
接收SIP 音訊、ONVIF 音訊和組播
本地使用內部音訊檔案廣播
8W (PoE)/15W(PoE+)內建放大器，1 LINE音訊輸出
2個控制輸入和1個控制輸出
HTTP指令（接收）
音訊檔案儲存（20個文件，總計80MB 、WAV/MP3）
播放程式（重複、每週計時器）
PoE/PoE+供電

規格設備 A&E規格下載

電源

PoE+ (符合IEEE802.3at Class 4標準)， PoE (符合IEEE802.3af Class 3標準)

消耗功率

22 W (於PoE+供電時，額定輸出功率)
12.95 W (於PoE供電時，額定輸出功率)
5 W (符合IEC62368-1標準)

Amplifier Rated Output

15 W (at PoE+ powered), 8 W (at PoE powered)

頻率響應

280 Hz ~12.5 kHz

輸出音壓電平

112 dB (1 W, 1 m) (500 Hz 至 2.5 kHz, 峰值)

Maximum Sound Pressure Level

124 dB (於PoE+供電時，15 W, 1 m) (500 Hz 至 2.5 kHz, 峰值)
121 dB (於PoE供電時，8 W, 1 m) (500 Hz 至 2.5 kHz, 峰值)

音聲壓縮方式

Opus, PCMU (G.711u), PCMA (G.711a), G.722

廣播模式

SIP 廣播模式: Opus/PCMU/PCMA/G.722
組播廣播模式: Opus/PCMU/PCMA/G.722 自動編解碼器識別，20個連接埠
VMS 廣播模式: PCMU
內部訊息廣播模式
注意: 可以使用優先順序設定功能為每種廣播模式指定優先級順序。

Sound Source Files

最多 20 個檔案 (檔案存儲容量: 總共 80 MB)
支持的檔案格式
WAV 檔案: 8/16/44.1/48 kHz 採樣頻率, 8/16 位元, 單聲道/立體聲
MP3 檔案: 32/44.1/48 kHz 採樣頻率, 64 - 320 kbps, CBR/VBR, 單聲道/立體聲
重複播放: 播放次數(1-10 次), 時長 (5-3600 秒) 或計時器 (從開始時間到結束時間)
間隔時間: 0 - 99 秒, 延遲時間: 0 - 99 秒
觸發: 控制輸入或遠端 API (HTTP)

網絡I/F

100BASE-TX, MDI/MDI-X, RJ-45

網路通訊協定

TCP/IP, UDP, HTTP, RTP, ARP, ICMP, RTSP, SIP (RFC3261)

控制輸入

2個通道, 無電壓閉合觸點輸入, 開路電壓: 5 V DC, 短路電流: 2 mA 或以下, 可拆卸接線端子 (3針)

控制輸出

1個通道，集極開路輸出，耐壓：30V DC，控制電流：50 mA或以下，可拆卸接線端子（3針）

指示燈

LAN LINK/ACT (green), STATUS (orange)

時間誤差

±13 seconds per month

時間校正

手動時間設置，通過NTP伺服器進行時間調整

斷電保護時間

4小時 (RTC保持時間, 溫度40°C (104°F)

Dust/Water Protection

IP66

工作溫度

–30 °C to +55 °C (–22 °F to +131 °F)

工作濕度

90%相對濕度或以下 (無凝結)

外觀

喇叭口和外殼: 鋁,米白色(相當於RAL 9010),噴漆
反射喇叭: ABS樹脂,米白色(相當於RAL 9010)
後蓋: PC樹脂,米白色(相當於RAL 9010),噴漆
支架、螺絲和螺栓: 不銹鋼

尺寸

222 (w) x 211 (h) x 276 (d) mm (8.74" x 8.31" x 10.87")

重量

1.4 kg (3.09 lb)

附屬品

Rear cover x 1, Removable terminal plug (3 pins) x 2

選配品

喇叭安裝支架：SP-131、SP-201、SP-301
桿帶：YS-60B

Note: Take special care to avoid mounting this speaker directly to structures (such as ski lift towers) that generate large amounts of vibration. Also, do not use this speaker in environments where it may be exposed to oil or other chemicals, as mounting parts could rapidly deteriorate, possibly resulting in personal injury or other accidents due to the speaker falling.
*ONVIF is a registered trademark of ONVIF Inc.
*These specifications apply to the firmware version 3.1.0 or later. For the latest specifications and firmware, please refer to the TOA DATA Library (https://www.toa-products.com/international/)

請下載資料以獲取完整規格。

可選配件

SP-131

YS-60B

The IP horn loudspeaker shall be able to support various standard network protocols and forums such as API (Application Programming Interface), and shall be able to complement VMS (Video Management System) and other network video integration systems.

For the deployment of multiple speakers, multi-cast paging shall be made possible via a SIP microphone or telephone.
The device shall be protected against the ingress of water and dust to IP 66 standards and shall be SIP compliant to broadcast clear and intelligible messages over a wide area via a single network cable.

There shall be two no-voltage control input and an open collector output for broadcast; internal audio source, calling to a SIP telephone and an external beacon, etc.
Remote settings of the IP horn loudspeaker shall be achieved by connection to a Windows® based personal computer and by using the PC’s browser, operational settings, functions, speaker volumes and system status can be achieved.

The frequency response of the loudspeaker shall be between 280 Hz – 12.5 kHz measured on axis with a Sound Pressure Level (SPL) of 124 dB measured at 1 meter with a power input of 15 watts or 121dB with a power input of 8 watts measured at 1 meter. The internal class-D amplifier shall be capable of producing up to 8 watts of power using PoE and up to 15 watts of power when using PoE+.

The IP horn loudspeaker shall operate in temperature conditions of between -30 to + 55 °C (-22 to 131 °F) and shall be constructed from aluminum with an ABS resin reflector horn finished in an off-white (RAL 9010 equivalent), bracket, screws and bolts shall be stainless steel. Dimensions shall be 222(W) ×211(H) ×276(D) mm (8.74“ × 8.31“ × 10.87 “) weighing 1.4kg (3.09 lb).

Optional extras:

Speaker Mount Bracket: SP-131, SP-201, SP-301

Pole Band: YS-60B

manufactured by TOA Corporation

Manufacturer: TOA Corporation
Model: IP-A1SC15

請登入以存取更多技術資料，例如軟體、韌體或EASE檔案。

登入