DA-X1000S-EA

Digital Power Amplifier 1x1000W

DA-X1000S-EA

This is a Class D amplifier used for VX-1000 system which is compliant with the Chinese Standard CCCF for fire alarm system, connected by a dedicated interface. This has AUX INPUT which is for general purpose connection. DA-X1000F single-channel amplifier is a part of VX-1000 Basic system and these models will be used with VX-1000MC. Basic concept is smooth connection and interface with VX-1000MC. PA-LINK connection with RJ45 connector is used.

Low-loss Class D power amplifier
1 channel 1000W
can be used as standby amplifier

規格下載

電源

AC220V-240V, 50Hz/60Hz

Amplification System

Class D amplifier

消耗功率

30W(standby mode), 1200W(Rated output 100V line, 10Ω)

輸入

1 channel: PA LINK (Dedicated Interface with VX-1000MC)
1 channel: AUX INPUT=0dB(1V) (Input level control in maximum position), 20kΩ, electronically-balanced

額定輸出

1 channel: 1,000W (100V line, 10Ω)

頻率響應

110 to16 kHz ±3dB

總諧波失真

0.4% (1W), 1% (Rated output)

S/N比

>90dB (A-weighted)

控制輸入

ACTIVE: Short=AUX INPUT signal source goes Amplifier output/ Open= PA LINK signal source goes Amplifier output

控制

Front: Power switch
Rear : Input volume

回路保護

Overcurrent protection, under-voltage protection, overvoltage protection, overheat protection, short circuit protection

LED指示燈

POWER (Green) x 1, SIGNAL (Green) x 1, PEAK (Red) x 1, AUX ACTIVE (Orange) x 1, FAULT (Red) x 1

Cooling

Forced air cooling by FAN

工作溫度

0°C to +40°C

工作濕度

90% RH or less (no condensation)

外觀

Front panel AL Black, Cover SECC Black

尺寸

483(W)×88(H)×392(D)mm

重量

6.18 kg

附屬品

CN)AC power cord x1, (EN)AC power cord x1, pluggable terminal block 2P x1, pluggable terminal block 5P x1

請下載資料以獲取完整規格。

請登入以存取更多技術資料，例如軟體、韌體或EASE檔案。

登入