DA-X0130F-EA
Digital Power Amplifier 4x130W
DA-X0130F-EA
This is a Class D amplifier used for VX-1000 system which is compliant with the Chinese Standard CCCF for fire alarm system, connected by a dedicated interface. This has AUX INPUT which is for general purpose connection. DA-X0130F 4-channel amplifier is a part of VX-1000 Basic system and these models will be used with VX-1000MC. Basic concept is smooth connection and interface with VX-1000MC. PA-LINK connection with RJ45 connector is used.
- Low-loss Class D power amplifier
- 4 channels 130W
- can be used as standby amplifier
電源
AC220V-240V, 50Hz/60Hz
Amplification System
Class D amplifier
消耗功率
85W(standby mode), 740W(Rated output 100V line, 67Ω x4)
輸入
4 channels: PA LINK (Dedicated Interface with VX-1000MC)
4 channels: AUX INPUT=0dB(1V) (Input level control in maximum position), 20kΩ, electronically-balanced
4 channels: AUX INPUT=0dB(1V) (Input level control in maximum position), 20kΩ, electronically-balanced
額定輸出
4 channels: 130W (100V line, 67Ω)
頻率響應
100 to 20 kHz ±3dB
總諧波失真
0.4% (1W), 1% (1kHz, Rated output)
S/N比
>85dB (A-weighted)
Crosstalk
70 dB (A-weighted)
控制輸入
ACTIVE: Short=AUX INPUT signal source goes Amplifier output/ Open= PA LINK signal source goes Amplifier output
控制
Front: Power switch
Rear: 4 channels input volume
Rear: 4 channels input volume
回路保護
Overcurrent protection, under-voltage protection, overvoltage protection, overheat protection, short circuit protection
LED指示燈
POWER (Green) x 1, SIGNAL (Green) x 4, PEAK (Red) x 4, AUX ACTIVE (Orange) x 4, FAULT (Red) x 4
Cooling
Forced air cooling by FAN
工作溫度
0°C to +40°C
工作濕度
90% RH or less (no condensation)
外觀
Front panel AL Black, Cover SECC Black
尺寸
483(W)×88(H)×392(D)mm
重量
6.90 kg
附屬品
CN)AC power cord x1, (EN)AC power cord x1, pluggable terminal block 2P x1, pluggable terminal block 5P x1
請下載資料以獲取完整規格。
請登入以存取更多技術資料，例如軟體、韌體或EASE檔案。
