SX-200IP
IP Interface Module
SX-200IP
Installed in the SX-2100AI Audio input unit of the SX-2000 series and connected to a network (LAN or WAN), the SX-200IP allows paging announcements to be made to the SX-2000 system from the N-8000 series' station(s) (N-8600MS and N-8610RM) employing the packet audio technology.
- RJ45 connectors
- Enable paging announcement from the N-8000 Series stations (N-8600MS and N-8610RM) to the SX-2000 System
Network Section
Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Connector: LAN: RJ45 connector
Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software)
48 kHz sample rate is used for SX-2000 system only.
Quantifying bit number: 16 bits
Voice encoding method: Sub-band ADPCM, Cryptosystem
Voice packet loss recovery: Silence insertion
Audio delay time: 80 ms, 320 ms (controllable on the software)
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Connector: LAN: RJ45 connector
Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software)
48 kHz sample rate is used for SX-2000 system only.
Quantifying bit number: 16 bits
Voice encoding method: Sub-band ADPCM, Cryptosystem
Voice packet loss recovery: Silence insertion
Audio delay time: 80 ms, 320 ms (controllable on the software)
Indicator
Operation indicator (RUN)
Operating Temperature
0 ℃ to +40 ℃ (32 ℉ to 104 ℉)
Operating Humidity
90 %RH or less (no condensation)
Finish
Panel: Pre-coated steel plate, black, 30 % gloss
Dimensions
35 (W) x 119.5 (H) x 178.4 (D) mm (1.38 x 4.7" x 7.02")
Weight
150 g (0.33 lb)
Please download Datasheet to access full specifications.
Required Accessory
Need other technical materials like software? Please visit Download Center.
*Sign-in or membership registration is required.
Related Products
- Products
SX-200IP
