WT-5805 C05UK
Wireless Receiver
WT-5805 C05UK
The wireless tuner WT-5805 is a PLL-synthesizer controlled double superheterodyne diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.
- Automatic frequency scan
- Integrated squelch function
- Ideally suited for fixed installations such as in event locations, multi-purpose and sports halls, plenary and conference venues, churches, auditoriums etc.
- System always select the stronger of the two antenna signals for further processing
- Setup with up to 16 simultaneously operating receivers possible
Power Source
AC mains (Supplied AC adapter must be used)
Power Consumption
200 mA (12 V DC)
Receiving Frequency
576 - 865 MHz, UHF
Channel Selection
64 selectable frequencies
Receiving System
Double super-heterodyne
Diversity System
Space diversity
Mixing Output
MIC/LINE (selectable): –60 dB*1 (MIC)/–20 dB*1 (LINE), 600 Ω
Phone jack (unbalanced), 600 Ω XLR-3-32 type connector (balanced)
Phone jack (unbalanced), 600 Ω XLR-3-32 type connector (balanced)
Mixing Input
–20 dB*1, 10 kΩ, unbalanced, phone jack
Antenna Input
75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max)
Receiving Sensitivity
90 dB or more, Signal to Noise ratio (20 dBμV input, 40 kHz deviation)
Harmonic Distortion
1% or less (typical)
Squelch Sensitivity
16 – 40 dBμV variable
Squelch System
Using together of noise SQ, carrier SQ and tone SQ
Tone Frequency
32.768 kHz
Indicator
Audio (6 steps), RF (6 steps), ANT A/B, Audio (peak), Battery alarm
Channel Check
Usable frequencies scanning
Signal to Noise Ratio
110 dB or more (A-weight, unbalanced output)
Frequency Response
100 Hz – 15 kHz, ±3 dB
Operating Temperature
–10°C to +50°C (14°F to 122°F)
Operating Humidity
30 % to 85 %RH
Finish
Resin, black
Dimensions
210 (W) x 44 (H) x 205.1 (D) mm (8.27" x 1.73" x 8.07")
Weight
700 g (1.54 lb)
*Verion | Receiving Frequency
A01 | 692 - 722 MHz, UHF
B01, B02 | 722 - 752 MHz, UHF
C01 - C07 | 794 - 830 MHz, UHF
D01 - D05 | 830 - 865 MHz, UHF
E01 | 668 - 698 MHz, UHF
F01 | 636 - 666 MHz, UHF
G01, G02 | 606 - 636 MHz, UHF
H01 | 576 - 606 MHz, UHF
Note: For Thailand,
B02 | 748.3 - 757.7 MHz, C04 | 803.3 - 805.7 MHz
A01 | 692 - 722 MHz, UHF
B01, B02 | 722 - 752 MHz, UHF
C01 - C07 | 794 - 830 MHz, UHF
D01 - D05 | 830 - 865 MHz, UHF
E01 | 668 - 698 MHz, UHF
F01 | 636 - 666 MHz, UHF
G01, G02 | 606 - 636 MHz, UHF
H01 | 576 - 606 MHz, UHF
Note: For Thailand,
B02 | 748.3 - 757.7 MHz, C04 | 803.3 - 805.7 MHz
Please download Datasheet to access full specifications.
The wireless receiver shall have 64 selectable channels and a built-in scanner function to scan the RF environment and indicate available channels. The receiving method shall be double super-heterodyne using threshold-comparative antenna switching diversity. Specifications shall include a S/N ratio of greater than 110 dB (A-weighted), harmonic distortion of less than 1% and frequency response of 100 - 15k Hz, +/-3 dB. The receiving sensitivity shall be greater than 90 dB with 20 dBµV input and 40k Hz deviation. Squelch types shall be carrier, noise and tone key with a variable squelch sensitivity of 18 - 40 dBµV and a 32.768k Hz tone key frequency. The receiver shall have two antenna inputs, each with BNC-type connectors, 75 ohm impedance and 9 VDC, 30 mA, available for remote antennas. The audio outputs shall be balanced type with XLR-M jack and sensitivity of -60 dB / 1 mV, and unbalanced type with 1/4" phone jack and sensitivity of -20 dB / 100 mV, both with an output impedance of 600 ohms. A Mix Input, unbalanced type with 1/4" phone jack with an input impedance of 10k ohms and sensitivity of -20 dBV / 100 mV shall allow the connection of the output of a second receiver or other audio source to be mixed with the main receiver output signal. The front panel shall include an LCD for RF and AF monitoring as well as frequency setting and scanner functions. Front panel LED's shall include antenna A / B reception status, low battery indication, and an AF peak indicator that lights at 3 dB below clipping. Front panel controls shall include Up, Down, and Set keys for menu navigation as well as Power and Volume. The wireless receiver shall be powered from the AC mains using a supplied AC-DC adapter with a power consumption of 200 mA (12 VDC). The unit shall operate within a temperature range of -10° C to +50° C (+14° F to +122° F).Unit construction shall be black resin with dimensions (W x H x D) of 210 x 44.6 x 205 mm (8.27” x 1.76” x 8.1”) and weight of 700 g (1.54 lbs.. Included accessories shall be two whip antennas and an external AC-DC adapter. Up to two units shall be rack-mountable in one standard 19" rack height with an optional rack-mount kit.
Need other technical materials like software? Please visit Download Center.
*Sign-in or membership registration is required.
- Products
WT-5805 C05UK
