EM-600

Flush-mount Boundary Microphone

EM-600

The EM-600 is an omnidirectional condenser microphone of only 28 mm (1.1") in diameter designed for sound pick-up application. It can be flush-mounted into a ceiling, wall, or desk, making it unobtrusive. It provides clear and high-quality sound.

Wide frequency range provides well-balanced sound with clarity and a satisfying tonal response
Unobtrusive design allows easy flush-mounting in walls, ceilings, and desktops
Optimized to deliver best performance when used on a desk or attached to a ceiling
A 50 Hz low-cut filter reduces intrusive noise, such as air conditioner rumble or door opening/closing
Two rubber isolation rings provided as an accessory serving to reduce vibration

Specifications A&E Specs Downloads

Element

Electret condenser

Polar Pattern

Omnidirectional

Impedance

120 Ω, balanced

Sensitivity

-36 dB (1 kHz 0 dB=1 V/Pa)

Phantom Power

9 - 52 V DC

Frequency Response

30 Hz - 20 kHz

Output Terminal

XLR-3-12 equivalent

Operating Temperature

0 °C to +40 °C (32 ℉ to 104 ℉)

Finish

Body: Steel, white, semi-gloss, paint
Head: Zinc-plated steel wire, white, semi-gloss, paint

Dimensions

Ø28 x 68 mm (Ø1.1 x 2.68")"

Weight

85 g (0.19 lb)

Included Accessories

Rubber Isolation Ring …2, M20 Nut …1
※ The EM-600 requires 9 - 52 V DC phantom power for operation.

Please download Datasheet to access full specifications.

The flush-mount boundary microphone shall be designed for sound pick-up applications, be 28 mm (1.1") in diameter, and have an omnidirectional electret condenser microphone element. It shall be unobtrusively mountable into a ceiling, wall or desk.
Frequency response shall be 30 Hz to 20k Hz. Rated impedance shall be 120 ohm, balanced, and rated sensitivity shall be –36 dB (1k Hz 0 dB=1 V/Pa). A 50 Hz low-cut filter shall reduce intrusive noise. The microphone shall be powered by any phantom power source supplying 9 – 52 volts. The output connector shall be XLR-3-12 equivalent. Operating temperature shall be 0° C to +40° C (32° F to 104° F). Body finish shall be steel, and head finish shall be zinc-plated steel wire, both with white semi-gloss paint. Dimensions shall be ø28 x 68 mm (ø1.1" x 2.68"), and weight shall be 85 g (0.19 lbs.). Two rubber isolation rings and an M20 nut shall be provided as accessories. The microphone shall provide clear and high-quality sound, and be well-suited for conference recording and security monitoring applications.
The flush-mounted boundary microphone shall be TOA model EM-600.

Need other technical materials like software? Please visit Download Center.
*Sign-in or membership registration is required.

Download Center

Products
EM-600