YW-4500

Antenna for Wall-/Ceiling Mounting

YW-4500

The wireless antenna YW-4500 has been designed for UHF band wireless system. Cable loss can be compensated for by a built-in RF signal booster. The YW-4500 in a dipole antenna designed to be installed indoors. Use the coaxial cable with 75 Ω impedance.

Omnidirectional dipole antenna for wall or ceiling mounting
By means of the integrated RF amplifier losses induced by long cable runs can be compensated

Specifications A&E Specs Downloads

Power Source

7 to 12 V DC (supplied from amplifier or tuner/receiver)

Power Consumption

15 mA or less

Receiving Frequency

550 - 932 MHz, UHF

Dipole Ratio Relative Gain

8 dB or more (780 MHz)

Antenna Gain

More than 8 dB (0 dB position)

VSWR

3.0 or less

Output Impedance

75 Ω

Mounting Hole Pitch

83.5 mm (dimensions for wiring box)

Operating Temperature

–10 to 50°C

Operating Humidity

30 % to 85 %RH (no condensation)

Dimensions

105 (W) x 140 (H) x 126 (D) mm

Weight

270 g

Included Accessories

M3.5 screw for wiring box x 2, Tapping screw (M4) for wooden wall x 2, RG-6/U or RG-11/U sleeve x 1

Please download Datasheet to access full specifications.

The remote dipole antenna shall be suitable for use in the UHF frequency range of 550 - 932 MHz. The antenna gain shall be greater than 8 dB with a V. S. W. R. of less than 3. The output impedance shall be 75 ohm with an operating distance of 35 m (115 ft.) maximum using RG-6U cable or 50 m (164 ft.) maximum using RG-11U cable. The antenna power requirement shall be 7- 12 VDC with current consumption of less than 24 mA supplied from the wireless receiver or antenna distributor. The unit shall have a mounting hole pitch of 3.29" (83.5 mm). The operating temperature shall be -10° C to +50° C (+14° F to +122° F). Unit construction shall be AES resin, off-white with dimensions of 105 x 140 x 126 mm (4.13” x 5.51” x 4.96”) and weight of 300 g (0.66 lbs.).

Please sign in to access further technical materials such as software, firmware or EASE files.