PM-660U
Paging Microphone
PM-660U
Designed for paging calls and general announcements, the PM-660U desk-top microphone comes with a large talk switch and a lock lever for easy and convenient operation. Its robust anti-vibration construction and balanced output render the microphone resistive to noise. In addition, the PM-660U microphone is equipped with a remote control switch (interlocked with the talk switch) for amplifier power on/off operation or chime activation.
- Short-off talk switch with locking lever or openoff type switch contact
- Low handling noise
- 2 m without plug
Type
Moving coil microphone
Polar Pattern
Unidirectional
Impedance
600 Ω, Balanced
Sensitivity
-58 dB (1 kHz, 0 dB=1 V/Pa)
Frequency Response
100 Hz - 10 kHz
Output
4-conductor (2-shielded) cable (2.5 m (8.2 ft) without plug
Talk Switch
1-push-to-talk switch, 1-locking lever, Short-off type
Remote Control
500 mA or less at 30 V DC
Operating Temperature
-10 °C to +50 °C (14 °F to 122 °F)
Operating Humidity
95 %RH or less (no condensation)
Finish
Microphone head: Zinc plated steel wire, gray baked paint
Main unit: ABS resin, gray
Main unit: ABS resin, gray
Dimensions
100 (W) x 212 (H) x 150 (D) mm (3.94" x 8.35" x 5.91")
Weight
400 g (0.88 lb) (cord excluded)
*Do not keep the lock lever placed in the locked state (ON position) for a long period of time. Doing so may cause poor conductivity in the lever switch due to deterioration with age, resulting in unit malfunction.
Please download Datasheet to access full specifications.
Optional Accessory
Dynamic table microphone in beautifully shaped enclosure with lockable talk button
Please sign in to access further technical materials such as software, firmware or EASE files.
