M-9000M2
Digital mixer
M-9000M2
The M-9000M2 Pre-Amplifier is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as existing 900 series input modules can be used. The most appropriate modules can be selected depending on applications.
It is equipped with signal processing and control functions necessary for sound reinforcement, permitting all parameters to be set at the mixer. Settings data can be stored inside the unit and called up using the keys on the front panel.
- Aluminum front panel and steel case
- For rack-mounting, 2 units height
- Up to 16 panels can be connected to 1 M-9000M2 by using a RC-001T control module
- Panels can be cascaded
- Different modules, remote panels and a sensing microphone for individual adjustment to the ambient noise
- Easy to use software
(*1) 0 dB = 1 V
Power Source
220 - 240 V AC, 50/60 Hz
Power Consumption
40 W
Audio Input
Max. 8 channels, modular construction (modules optional)
Audio Output
Preamplifier output 1, 2: 0 dB(*1), 600 Ω, balanced,
removable terminal block (3 pins)
removable terminal block (3 pins)
Module Slot
Analog input (slot 1 - 8): -10 dB(*1), 10 kΩ, unbalanced
Digital input (slot 1 - 4): 24 bit/48 kHz
MIX output (slot 1 - 8): -14 dB(*1), 330 Ω (CH 1 prefader output), unbalanced
Digital output (slot 5 - 7): 24 bit/48 kHz
Power supply (slot 1 - 8): +24 V, -24 V, +6 V DC
Digital input (slot 1 - 4): 24 bit/48 kHz
MIX output (slot 1 - 8): -14 dB(*1), 330 Ω (CH 1 prefader output), unbalanced
Digital output (slot 5 - 7): 24 bit/48 kHz
Power supply (slot 1 - 8): +24 V, -24 V, +6 V DC
Digital Audio Signal Reference Level
-20 dBFS
Frequency Response
20 Hz - 20 kHz, +1, -3 dB
Total Harmonic Distortion
0.008 % (at 22 kHz LPF, 1 kHz, +10 dB(*1) output)
Signal to Noise Ratio
At Input short, 20 Hz - 20 kHz, set to ALL FLAT or OFF setting
Output volume min.: 90 dB
Output volume max.: 61 dB (Input 1 volume: 0 dB, Other Inputs: OFF)
Output volume min.: 90 dB
Output volume max.: 61 dB (Input 1 volume: 0 dB, Other Inputs: OFF)
Crosstalk
64 dB or more (at 20 kHz)
Tone Control
Bass: ±12 dB (at 100 Hz)
Treble: ±12 dB (at 10 kHz)
Treble: ±12 dB (at 10 kHz)
Parametric Equalizer
10 bands, Frequency: 20 Hz - 20 kHz, 31 points, Variable range: ±12 dB, Q: 0.3 - 5
Speaker Equalizer
10 (setup software has 30 TOA speaker presets)
High-Pass Filter
-12 dB/oct, Variable frequency range: 20 Hz - 20 kHz, 31 points
Low-pass Filter
-12 dB/oct, Variable frequency range: 20 Hz - 20 kHz, 31 points
Compressor
Depth: 1 - 5
Delay
0 - 40 ms (1 ms steps), maximum 40 ms (CH 1 + CH 2), mixer mode only
Scene/Event Memory
32
Auxiliary Function
Key lock function
Control Input/Output
RS-232C(*2), D-sub connector (9 P, female)
Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3 V DC,
short-circuit current: 1 mA or less, removable terminal block (14 pins)
Control output: 4 outputs, open collector output, withstand voltage: 27 V DC,
control current: 50 mA, removable terminal block (14 pins)
Remote volume: 2 channels, connect a 10 kΩ/linear taper variable resistor or
input the DC voltage of 0 to +10 V, removable terminal block (14 pins)
Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3 V DC,
short-circuit current: 1 mA or less, removable terminal block (14 pins)
Control output: 4 outputs, open collector output, withstand voltage: 27 V DC,
control current: 50 mA, removable terminal block (14 pins)
Remote volume: 2 channels, connect a 10 kΩ/linear taper variable resistor or
input the DC voltage of 0 to +10 V, removable terminal block (14 pins)
Operating Temperature
-10 °C to +40 °C (14 °F to 104 °F)
Operating Humidity
35 % to 80 %RH (no condensation)
Finish
Panel: Aluminum, hair-line, black
Case: Surface-treated steel plate, black, paint
Case: Surface-treated steel plate, black, paint
Dimensions
420 (W) x 107.6 (H) x 353 (D) mm (16.54" x 4.24" x 13.9")
Weight
6 kg (13.23 lb)
Included Accessories
Power cord (2 m (6.56 ft) …1, Rack mounting bracket …2, Bracket mounting screw …4,
Blank panel …7, Blank panel mounting screw …14,
Removable terminal plug (3 pins) …2, Removable terminal plug (14 pins) …1, CD …1
Blank panel …7, Blank panel mounting screw …14,
Removable terminal plug (3 pins) …2, Removable terminal plug (14 pins) …1, CD …1
(*2) Allowing it to be controlled by a control system such as AMX and Crestron through RS-232C port.
Notes: AMX is a trademark of AMX Corporation.
Crestron is a trademark of Crestron Electronics, Inc.
Notes: AMX is a trademark of AMX Corporation.
Crestron is a trademark of Crestron Electronics, Inc.
Please download Datasheet to access full specifications.
Fully digital, modular mix system with up to 8 audio input and 8 outputs. Combined operation for mixing and PA applications. Programming of the signalling pathways and functions via PC with supplied software or directly on the device with the help of LCD display with integrated bar meter.
In addition to audio signal input and output modules, the system with modules for the ambient noise-dependent volume control, with additional control inputs and telephone connection can be fitted.
Emergency-off to mute of the mixing system, so that announcements are made by an external PA system be not heard.
2 balanced outputs with 24-bit d / a converters, and extremely low THD with height and deep tone control, high and low pass filters, 10 parametric equalizer, delay and 15 pre-set correction filter of various speakers. Compressor with 5 predefined settings for ease of use. Connection via two supplied Plug-in 3-pin connectors.
Two ports for external volume control or optional remote control units. Optional RS-485 module for the connection of up to 16 bi-directional remote control units.
Features: complete routing (8 x 8 matrix) in 32 presets can be saved and easily to call. Auto mixer with variable NOM setting (0-20), as well as printer automatic. Outputs with up to 40 ms delay (delay). Four priorities as well as optionally mutually locking/superseding priority or mixing, background music distribution language for programmable and easily available, transfers (E.g. announcements) or contact-controlled or via bi-directional remote control unit.
Please sign in to access further technical materials such as software, firmware or EASE files.
