RM-500

Remote Microphone

RM-500

The RM-500 is a desktop type remote microphone for general broadcasts. Equipped with an LCD screen, it can display up to 80 function names registered in advance, allowing these functions to be executed with the key operation. The AUX key allows only the external audio signals to be controlled regardless of whether the microphone broadcasts are present or not. The speech intelligibility function makes it easier to hear the microphone announcements even in noisy environments, and also allows the microphone to pick up the audio signals at an appropriate level even if speaking too close to or too far from it. The RM-500 can be mounted on the wall by using an optional wall mounting bracket.

Specifications Equipment A&E Specs Downloads

Power Source

24 V DC (operating range: 15 - 33 V DC)
Supplied from the applicable system (RJ45 connector) or the optional AD-246 AC adaptor (DC input power supply connector)
Usable DC power supply plug: 55mm (0.22") outer diameter, 2.1mm (0.08") inner diameter, 9.5mm (0.37") long, polarized, center positive.

Operation

Numeric key x 10, Left/right selection key x2, F1/F2 key x2, All key x1, Clear key x1, Talk key x1, AUX key x1

Current Consumption

130 mA or less

Audio Output

0 dB, balanced, RJ45 connector

AUX Input

1 channel, unbalanced, LINE/MIC (selectable with the setting switch)
LINE: -20 dB, 10kΩ, push-in terminal block
MIC: -60 dB, 2.2kΩ, push-in terminal block

Distortion

1% or less

Frequency Response

100 Hz - 20 kHz

Signal to Noise Ratio

60 dB or more

Microphone

Unidirectional electret condenser microphone

Chime

Uses the built-in sound sources of the main system unit
(one of them selectable by the main system settings)

Level Control

Microphone volume control, AUX volume control

Control Output

1 channel, open collector output, withstand voltage: 30 V DC, control current: 35 mA, push-in terminal block

RM Link

Shielded Category 5 twisted pair LAN cable (CAT5-SIP), RJ45 connector
Maximum cable distance: 1200m (3937.01ft) (when powered by optional AD-246 AC adapter)

Connection Cable and Connector

Solid copper wire: Ø0.4 - Ø1.1mm (AWG 28-17)

Control Input

1 channel, no-voltage make contact inputs, open voltage: 33 V DC, short-circuit current: 10 mA, push-in terminal block.

Indicator

LCD display: 3" (255 x 160 dots), with backlight
Indicator: Talk indicator (green), Microphone indicator (green)

Operating Temperature

0 °C to +40 °C (32 °F to 104 °F)

Operating Humidity

90% RH or less (no condensation)

Finish

ABS resin, black, paint

Dimensions

224(W) x 47.2(H) x 136(D) mm (8.82" x 1.86" x 5.35")
(excluding microphone)

Weight

620 g (1.37 lb)

Included Accessories

Zip tie x2

Optional Accessories

Wall mounting bracket: WB-RM500
AC adapter: AD-246

Compatible Model

VX-3000 Series

Please download Datasheet to access full specifications.

Optional Accessory

WB-RM500

The remote microphone shall work in conjunction with the TOA VX-3000 Series Integrated Voice Evacuation System and shall be of the desktop type with the option to easily wall mount, if desired, by using the optional wall mount hardware and simply adjusting the orientation angle of the microphone to suit. The microphone itself shall be a unidirectional electret condenser type. The remote microphone shall benefit from a 3 inches LCD display (255 X 160 dots) with backlight and shall display the list of set functions and broadcast status. The remote microphone shall be able to make live voice announcements and play back pre-recorded messages or tones to targeted zones by selecting a pre-registered function from up to 80 lists. The remote microphone shall have an auxiliary input allowing the broadcast of a remote audio signal (regardless of whether microphone announcements are present or not) from a single push key, and shall have an independent volume control. The remote microphone shall incorporate a speech intelligibility function optimising the clarity of speech, even in noisy environments, whilst maintaining equal audio levels from the orator that may be too close, or, too far from the microphone. The microphone shall also have an independent volume control. The remote microphone shall have control output terminals for the activation of external sources and controlled input terminals allowing the activation of an arbitrary broadcast. The microphone shall have a ring indicator in its head shell that will illuminate green during a broadcast. The TOA VX-3000 Series Integrated Voice Evacuation System software function shall be executed via the F1 and F2 keys on the front panel. The remote microphone shall have an easy to identify larger key for the purpose of a live broadcast. This key shall either have the function facility for Press to Talk (PTT) or can be locked, therefore requiring the key to be pressed before the announcement and at the end. A ‘clear’ key shall terminate a broadcast that is in progress and shall clear all of the selected zones. There shall be two key buttons to scroll through pages of the LCD. The LCD shall clearly display the status of the system such as the corresponding numeric key, the functions title, individual and overall icons displaying status, a chime icon when activated, an auxiliary and F1 and F2 area, broadcast status and page numbers 1 – 8. Power requirements shall be supplied from the TOA VX-3000 Series Integrated Voice Evacuation System via an RJ45 connector, or an optional 24 V DC input power supply. The remote microphone shall be housed in an ABS black resin enclosure weighing 620 g (1.37 lbs) with dimensions of 224 (w) x 47.2 (h) x 136 (d) mm (8.82" x 1.86" x 5.35") (excluding microphone)

Optional extras; Wall mounting bracket: WB-RM500, AC adapter: AD-246 manufactured by TOA Corporation

Manufacturer: TOA Corporation
Model: RM-500

Need other technical materials like software? Please visit Download Center.
*Sign-in or membership registration is required.

Download Center

Products
RM-500