ax02404ce

AX-0240

Compact Amplifier

AX-0240

AX-0240 is a lightweight and compact digital amplifier with high-efficiency output. After installing the additional purchase of network module, it can be used as network amplifier.

・Lightweight and compact digital amplifier with high efficiency output

・Adopt electronically balanced input

・Input and output terminals be used removable terminal block

・When there is short circuit, overload or when the temperature is too high, cut the amplifier output through built-in protection circuit.

・Protect output function to facilitate the monitoring of the power amplifier working condition.

・It can be placed on the table, easily installed on a wall through the purchase of additional installation fittings, or in a standard EIA rack for use.

・Reserve for a network connection module port, and after installing the additional purchase of network module, it can be used as network amplifier.

Specifications Equipment Downloads

Power Source

220-240 V AC 50/60 Hz

Amplification System

Class D

Power Consumption

61W (according to EN62368-1)
296W (rated output)

Audio Input

MIC IN: -60dB* 2.2kΩ, electronically-balanced, removable terminal block (3 pins)
LINE IN: -10dB* 2.2kΩ, electronically-balanced, removable terminal block (3 pins)

Audio Output

SPEAKER OUT: 240W (100V/ 42Ω), removable terminal block (4P)
LINE OUT: 0dB*, 10kΩ, electronically-balanced, removable terminal block (3P)

Fault Detection Output

Octocopter output, puncture: DC 35V, control current: below 50mA, removable terminal block (3 pins)

Frequency Response

50Hz - 20kHz ±3dB (Line)

Total Harmonic Distortion

1% (LINE:1kHz,1/3 rated output, with audio filter: audio precision AUX-0025 and LPF 20kHz filter)

Signal to Noise Ratio

MIC: Above 60dB (by audio filter: audio precision AUX-0025 and A-weighted)
LINE: Above 80dB (by audio filter: audio precision AUX-0025 and A-weighted)

Control/Monitor

MIC gain control, LINE gain control

LED Indicator

Power LED (green) x1, Signal LED (green) x1, Peak LED (red) x1, Protect output LED (red) x1

Cooling

Forced air cooling

Operating Temperature

-10°C to +40°C

Operating Humidity

Below 90% RH (no condensation)

Finish

Surface-treated steel plate, black, paint