ZP-001T
Telephone zone paging module
ZP-001T
The ZP-001T is a Zone paging module designed for use with the 9000 Series mixer / amplifiers and functions as interface to connect the 9000 Series mixer / amplifier to an analog PABX, allowing zone paging to be initiated from the PABX. There are two operation modes: ring signal and paging port modes. Broadcast can be initiated regardless of operation mode.
- Telephone paging to up to 8 zones. Uses DTMF dialing access outputs
- Dial up to 8 output zones in one operation (compatible with analog extension or page port)
- Page port operation requires closed contact
- RJ-11 telephone plug or detachable screw terminals
- Max. 1 telephone module / chassis
loop voltage: 24 V DC or more, which should be supplied from the PABX.
RJ11 connector
removable terminal block (4 pins)
short-circuit current: 0.5 mA, removable terminal block (4 pins)
control current: max. 50 mA, removable terminal block (4 pins)
請下載資料以獲取完整規格。
Telephone Access Paging to up to eight zones. Uses DTMF dialing to access amplifier and/or line outputs. Dial up to eight output zones in one operation.Analog Extension or Page Port compatible. Page port operation requires contact closure activation and DTMF signal pass-through. RJ-11 Telephone Jack and Removable Terminal Blocks
請登入以存取更多技術資料，例如軟體、韌體或EASE檔案。
