SX-2100AI
Audio Input Unit
SX-2100AI
The SX-2100AI is an audio input of the matrix system and can be mounted in an EIA equipment rack (2U size). Multiple units can be decentralized in a whole system. It features modular construction that allows it to handle from two to eight inputs per unit. Audio signals are transmitted digitally to the audio output unit, but an analog audio output function (1 channel) enables simultaneous all-zone calls for use in emergency situations. Audio input levels are indicated on the level meters provided for each input channel. Volumes can be adjusted for each channel using the volume controls on the front panel or the SX-2000 software. The volume controls can be locked. Any input channel can be monitored using the internal speaker. It is also equipped with 16 control inputs, and 16 control outputs. It is equipped with two power inputs, allowing for a redundant power system.
- Modular audio input
- 2 to 8 audio inputs per unit
- Multiple units can be decentralized in a whole system
- Audio signals are transmitted digitally to the audio output unit
- Audio input levels (post-fader levels) are indicated on the level meters provided for each input channel
- Volumes can be adjusted for each channel using the volume controls on the front panel or the SX-2000 software
- Volume controls can be locked using the SX-2000 software
- Input channels can be monitored using the internal speaker
- 2 power inputs for redundant power system to support a dual-redundant power supply system
24 V DC (operational range: 20 V – 40 V DC)
Two power inputs construction enables redundant power supply.
Under 1.50 A (when operated on 24 V DC)
Note: Excludes current consumption of the external equipment powered by the unit.
Status indicators, Power indicator, Standby indicator, CPU OFF indicator
Monitor ON/OFF keys, Menu screen operation keys (5)
monitoring possible using built-in speaker
To be connected via the switching hub specified by TOA
Note: This network must be made completely independent from other LAN.
Output: 1 output, RJ45 connector
(each one pair of audio wire, CPU OFF, control wire for system reset/start,
and connection check wire)
short-circuit current: 2 mA, photo coupler input,
removable terminal block (16 pins)
no-voltage make contact output: relay contact output
(withstand voltage: 40 V DC, control current: 2 – 300 mA),
removable terminal block (16 pins)
Please download Datasheet to access full specifications.
Fully digital audio input unit for installation in 19-inch cabinet racks (IEC 60297) for up to 8 audio sources.
Two network connections (100BaseTX) for redundant network for audio and control signals, additional analog reserve way. Redundant power supply for reliable power supply.
16 Control inputs and 16 control outputs with relay contact, normally closed or normally open freely selectable via detachable connectors.
Four slots for dual-channel modules for a goose, suitable for various signal sources from MIC to line level with various inputs removable screw terminal blocks, XLR and RCA jacks.
Large multicolored display on the front of the machine for:
-18-digit text display for system information
-Modulation bar indicator for each of the 8 channels
-Status of each channel (on/off)
-Status of network channels
-Collective fault signal
-Communication error (data line)
-Emergency mode
Buttons to select of the display of the system information. Separate display for power supply, standby (standby) and activated analog reserve way.
Four function keys to choose of pre-programmed music transfers or activation of transmissions from an entrance on pre-programmed areas. 8 Channel keys to the switching on and off individual channels, optionally umprogrammierbar on activation of transmissions from an entrance on pre-programmed areas. Volume control for each channel, which is bridged for emergency-related transfers. Access to all the controls can be locked.
Built-in monitor speakers with volume control to listen to each channel.
Compliant monitoring of all alarm-relevant signaling pathways, CPU, power supply and network connections.
Need other technical materials like software? Please visit Download Center.
*Sign-in or membership registration is required.
- Products
SX-2100AI