SX-2000CO
Control Output Unit
SX-2000CO
The SX-2000CO is a control output of the matrix system and can be mounted in an EIA equipment rack (1 U size). Multiple units can be decentralized in a whole system. It is equipped with 32 control output channels. The indicators on the front panel monitor the control output line status.
Control output status when the CPU turns off can be set. The SX-2000CO has two power inputs and can support a dual-redundant power supply system. By using a stand-alone mode, system can be configured with only the SX-2000CO, SX-2000CI Control input unit and the power supply unit, permitting the contact data of multiple channels to be transmitted to the remote locations with simple wiring.
- 32 control outputs
- Front panel LED for monitoring the line status
- Supply of stabilized 24 V DC
- 2 independent power inputs
- Decentralised installation of multiple units possible
- RJ45 connectors
Power Source
Applicable power supply: AD-011, AD-031B
24 V DC (operational range: 20 – 40 V DC), redundant power supply enabled
using 2 channels of DC inputs
24 V DC (operational range: 20 – 40 V DC), redundant power supply enabled
using 2 channels of DC inputs
Current Consumption
Under 0.34 A (maximum value in the power operating range)
Under 0.29 A (at 24 V DC operation)
Under 0.29 A (at 24 V DC operation)
Indication
Power indicator, Control output indicators (32), CPU-OFF indicator, FAULT indicator
Control Output
32 outputs, no-voltage make contacts, relay contact outputs
(withstandvoltage: 40 V DC, control current: 2 – 300 mA),
removable terminal blocks (6P)
(withstandvoltage: 40 V DC, control current: 2 – 300 mA),
removable terminal blocks (6P)
CI/CO Link
Connector/Cable
RJ45 connector
Main cable: Shielded CPEV cable* or STP Category 5 straight cable
* When connecting the power supply to each unit: 1-pair for data line
When connecting the power supply only to the SX-2000CI:
1-pair data line and 2-pair power line for a redundant power supply
system, or 1-pair data line and 1-pair power line for a non-redundant power supply system
Branch cable: STP Category 5 straight cable
Main cable: Shielded CPEV cable* or STP Category 5 straight cable
* When connecting the power supply to each unit: 1-pair for data line
When connecting the power supply only to the SX-2000CI:
1-pair data line and 2-pair power line for a redundant power supply
system, or 1-pair data line and 1-pair power line for a non-redundant power supply system
Branch cable: STP Category 5 straight cable
Maximum Cable Length
800 m
Operating Temperature
0 – 40 °C
Operating Humidity
35 – 80% RH (no condensation)
Finish
Panel: Aluminum, black, anodized aluminum
Case: Surface-treated steel sheet
Case: Surface-treated steel sheet
Dimensions
482 (w) x 44 (h) x 331.5 (d) mm
Weight
3.6 kg
Please download Datasheet to access full specifications.
Optional Accessory
Control output unit for installation in 19-inch cabinet racks (IEC 60297) with 32 control outputs via relay changeover contacts, so that normally closed and normally open can be used. The activation of each single control output will be shown at the front by means of LEDs. The connection is via detachable connectors. Redundant power supply for reliable power supply. Supervised access to the system via RJ45 jacks. Additional RJ45 connector for control input unit. More ads for supply voltage, collective fault signal and activated analog reserve way.
Need other technical materials like software? Please visit Download Center.
*Sign-in or membership registration is required.
- Products
SX-2000CO
